Hitachi CP-S420 Projector User Manual


 
ENGLISH
ENGLISH-23
SPECIFICATIONS
SPECIFICATIONS
Table 12. Specifications
This specifications are subject to change without notice.
NOTE
Item Specification
Product name Liquid crystal projector
Liquid
crystal
panel
Panel size 2.3 cm (0.9 type)
Drive system TFT active matrix
Pixels
CP-X430:786,432 pixels (1024 horizontal x 768 vertical)
CP-S420:480,000 pixels (800 horizontal x 600 vertical)
Lens Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm
Lamp 250 W UHB
Speaker 1.0W+1.0W (stereo)
Power supply AC100 ~ 120V, 4.5A / AC220 ~ 240V, 1.9A
Power consumption 410W
Temperature range 0 ~ 35°C (Operating)
Size 360 (W) x 106 (H) x 256.5 (D) mm
Weight (mass) 4.5 kg
RGB
signal
input
RGB IN
1
Video: Analog 0.7Vp-p, 75terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
2
DVI (CP-X430 only)
TMDS, DC: 150~1200 mV / AC: 1.56 Vp-p
TTL Level (Positive/Negative)
AUDIO IN
RGB1
200mVrms, 50 k(max. 3.0Vp-p)
Stereo mini jack
DVI (CP-
X430 only)
RGB2
Video
signal
input
VIDEO IN
1.0Vp-p, 75terminator
RCA jack
S-VIDEO IN
Brightness signal: 1.0Vp-p, 75terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75terminator
0.300Vp-p (PAL/SECAM, burst signal),75terminator
Mini DIN 4-pin jack
COMPONENT
VIDEO
Y 1.0 Vp-p, 75 Terminator (Positive)
CB
/PB
0.7 Vp-p, 75 Terminator (Positive)
CR
/PR
0.7 Vp-p, 75 Terminator (Positive)
AUDIO IN
L
200mVrms, 50 k(max. 3.0Vp-p)
RCA jack
R
Signal
output
RGB OUT
Video: Analog 0.7Vp-p, 75output impedance (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
AUDIO OUT
200mVrms, output impedance 1 k(max. 3.0Vp-p)
Stereo mini jack
Control
functions
CONTROL D-sub 15-pin shrink plug
USB USB jack (B type)
Optional Parts
Lamp: DT00471
Air Filter: NJ06131
* For others, consult your dealer.