Hitachi CP-WX8240 Projector User Manual


  Open as PDF
of 5
 
Drawing function
5
Projector 6.
Operation
(continued)
Temporarily blanks out the display.
Touching anywhere in the tablet’s operation area recovers the
display.
Toggles between display/hide the Pattern (grid lines).
Cycles through the display source signals.
It can be used in the same way as the • INPUT button on
the projector’s control panel. However, images cannot be
selected from LAN port or USB TYPE B port.
Turns off the projector.
Touch/click the icon for three seconds or so.
If you turn the projector off while using the drawing function, •
any unsaved drawings will be lost.
Mouse 7.
Operation
When the computer screen is displayed, this function operates the
computer like a simple mouse or keyboard.
In order to use this function, connect the • USB TYPE B port of the
projector with a USB (A) port of the computer via a USB cable.
Then select MOUSE for the projector’s USB TYPE B function
setting.
Works like the Page Down button on a keyboard.
Works like the Page Up button on a keyboard.
Works like the left-click button on a mouse.
Works like the right-click button on a mouse.
Moves the mouse’s cursor in the direction of the arrow.
Exit8.
Closes the tool bar and exits the drawing function.
When exiting the drawing mode, all unsaved drawings are lost.•
Minimize9.
Minimizes the tool bar.
Touching the minimized tool bar icon displays the tool bar again.
Using the Drawing Function (continued)
 previous