Filter
Top Products
45
3. How to use Projector software – Basics -
3.1.2. Software Installation Procedure
1) Turn on the PC.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the
PC's CD-ROM drive.
4) After a moment, the Welcome to MIU Utilities
Setup dialog will appear as shown on the right.
Press Next.
If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as
follows:
(1) Click on the Start button on the toolbar and select Run.
(2) Enter E:\software\setup.exe and then press OK.
NOTE
If your CD-ROM drive is not drive E on your PC, you will need to
replace E with the correct drive letter assigned to your CD-ROM
drive.
5) The Choose Destination Location dialog
appears. Press Next.
7KH&?3URJUDP)LOHV?0,8B8WLOLW\IROGHUZLOOEHFUHDWHGDQGWKH
program will be installed into that folder.
•
If you wish to install to a different folder, click Browse and select another folder.
NOTE
&RQ¿UPWKHSURJUDPIROGHUQDPH
,I0,8B8WLOLW\LVRND\SUHVV1H[WWRFRQWLQXH
If not, enter the desired folder name and then
press Next.
+RZWRXVH³0,8/LYH9LHZHU´&RQWLQXHG
If software has been already installed, Uninstallation will be done. Click the cancel
button, then uninstallation will be canceled. If you uninstalled the software by mis-
RSHUDWLRQSOHDVHUHLQVWDOOWKHVRIWZDUHIURP¿UVWSURFHGXUH