Hitachi CP-X4011N Projector User Manual


 
12
Connecting with your devices (continued)
Setting up
If you insert a USB storage device, such as a USB memory, into the USB TYPE
A port and select the port as the input source, you can view images stored in the
device (
73).
You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.
In that case, the built-in speaker outputs the sound from the microphone, even
while the sound from the projector is output. You can input line level signal to the
MIC port from equipment such as wireless microphone. Select HIGH in the MIC
LEVEL item of the AUDIO menu when you input line level audio signal to the
MIC port. The volume of the microphone and that of the sound from the projector
can be controlled separately except for the standby mode. However, if you mute
the sound from the projector, the sound from the microphone is also muted.
• If a loud feedback noise is produced from the speaker, move the
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
NOTE
(continued on next page)
USB storage
device
►Before removing the USB storage device from the port of the
projector, be sure to use the REMOVE USB function on the thumbnail screen to
secure your data (
76).
CAUTION
Microphone system
Speakers
(with an amplifier)
Monitor
MIC
HDMI
USB
TYPE B
USB
TYPE A
DC5V 0.5A
LAN
COMPUTER IN1
COMPUTER
IN2
VIDEO
S-VIDEO CONTROL
MONITOR OUT
AUDIO
OUT
IN3
IN1
IN2
L
R
L
R
Y
Cb/Pb
Cr/Pr
R
L
RGB IN
Downloaded from www.Manualslib.com manuals search engine