Hitachi CP-X440 Projector User Manual


 
The projectors are compatible with the RGB Input 2 system, Video Input 3 system, and a wide
variety of other input signals. They also provide RGB Output and Audio Output terminals.
Whisper Mode ready reduces the fan noise down to 32dB. The result is quiet
performance even in small room settings such as a meeting or classroom.
These Hitachi projectors use three LCD panels, which output the red, green and blue
colors simultaneously. This results in smoother blacks, for extremely high quality images.
An easy-to-understand menu lets even first-time users easily make settings
with the remote control. And as a security measure, the projector will not
operate until you have entered a four-digit ID from the remote control.
*
The short focal point lens makes it possible to display a large 60”
screen at a projection distance of 1.8m. Even in conference rooms
or classrooms with limited space, you can give impressive
large-screen presentations.
When making initial settings or when the screen would
be blank, you can display a company logo, school name
or other still picture that has been preset in the projector.
This is an effective way to focus people’s attention on
the screen before beginning a presentation or lesson.
Analog RGB 1
Analog RGB Out
Analog RGB 2
Remote
Control
Control (RS232C)
Component
Video
S-VideoComposite Video
USB
Audio In 2
Audio In 1
Audio Out
Original image It could show your company logo, a welcome
message, dedicated to Mr...., and so on.
• 3,200 ANSI Lumens • Built-in LAN Control • Built-in 12W Speakers
• Auto Keystone Correction • DVI Interface • Full Connectivity
• 32dB Whisper Mode Ready • LCD Panel Technology
• My Screen Function • User Friendly Functions • Wide Angle Lens
• 3,200 ANSI Lumens
• Full Connectivity
• 32dB Whisper Mode Ready
• LCD Panel Technology
• My Screen Function
• User Friendly Functions
• Wide Angle Lens
• 2,500 ANSI Lumens
• Full Connectivity
• 32dB Whisper Mode Ready
• LCD Panel Technology
• My Screen Function
• User Friendly Functions
• Wide Angle Lens
* Standard mode operating noise is 37dB. Brightness in Whisper mode is approximately 20% lower.
* When using multiple projectors with a wired remote control (CP-X445 only),
you may operate the controls for only one projector at a time.
Menu Button
Menu Button
With a unique optical engine and
230W UHB lamp, the CP-X445
achieves outstanding brightness
of 3,200 ANSI Lumens.
It will project large screen
images that are clear and easy
to see, even in large rooms or
in bright classrooms and
meeting rooms.
The CP-X445 is equipped with
a LAN control function. This lets
you use a computer to control
and efficiently operate a group of
projectors linked by a LAN.
You can connect and disconnect
power to projectors installed far
from the computer and check how
long their lamps have been used.
Four 3W speakers are built in to
the projector. No matter where
it is placed in the room, the big
12W total audio output provides
clear sound. There is no need to
connect external speakers, and
even if the classroom does not
have speakers, the CP-X445
delivers all the sound you want.
Digital DVI Terminal
LAN
DC OUT
Plug and Play Freeze Function Magnifying Digital Gamma Correction 3D Y/C Separation (CP-X445)
3:2 Pull Down Auto Configuration (H-Phase, H-Size, Position) PIN Lock System
Analog RGB 1
Analog RGB Out
Analog RGB 2
Control (RS232C)
Component
Video
S-VideoComposite Video
Audio In 2
Audio In 1
Audio Out
CP-X440/CP-X444 CP-X445
Just push the Keystone button
on the projector for automatic
correction of vertical keystone
distortion. This helps make
troublesome screen settings
easy so you can smoothly
begin projection.
Connection via the digital DVI terminal
greatly reduces image deterioration,
ensuring the highest
possible picture
quality with
digital sources.