Filter
Top Products
49
(continued on next page)
Item Description
LIVE MODE
Selecting this item sets the projector onto the “Live Mode”.
On the “Live Mode”, the projector displays the images from the PC
via Network, supported by “MIU Live Viewer”. (
1.1 Live Mode of
the User’s Manual - Network Functions)
In the Live Mode, the message “Waiting for connection” will be
displayed until the “MIU Live Viewer” start to send computer screen
image.
PC-LESS
PRESENTATION
Selecting this item displays the PC-LESS PRESENTATION menu.
Using the menu is able to make the projector
display the images stored in SD Memory Card or
USB memory, and realizes a presentation without
PC. (
1.2 PC-LESS Presentation of the User’
s Manual - Network Functions)
MIU Menu
/'07=%1/276'4?
2+%674'
5'.'%6
+/#)'
5'672
+0276
126+10
/+7
'#5;/'07
5%4''0
.+8'/1&'
2%.'5524'5'06#6+10
5'672
G5*16
+0(14/#6+10
5'48+%'
MIU Menu
Remember that incorrect network settings on this projector
may cause trouble on the network. Be sure to consult with
your network administrator before connecting to an existing
access point on your network.
Select “MIU” from the main menu to access the following
functions.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
See the User’s Manual - Network Functions for details of
MIU operation.
NOTE • The factory default setting for DHCP is OFF. If your network has
DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT
GATEWAY automatically, please set DHCP to ON. (
2.5.2 Network Settings
of the User’s Manual - Network Functions)
• If you are not utilizing SNTP (
2.5.7 Date/Time Settings of the User’s
Manual - Network Functions), then you must set the DATE AND TIME (
51)
during the initial installation.
2%.'5524'5'06#6+10
6*7/$0#+.
5.+&'5*19
&+4'%64;
&+52.#;5+<'
-';%10(+)