Filter
Top Products
16
RGB signal input
VIDEO signal input
The menu SET UP serves for the change of parameters influencing the picture and for
the move picture position.
Adjustments and functions (continued)
SET UP
SETUP INPUT IMAGE OPT.
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
123
111
31
1024
R B
AUTO
SETUP INPUT IMAGE OPT.
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL
R B
Adjustment Item Details of adjustment
VOLUME
Decrease Increase
BRIGHT
(BRIGHTNESS)
Dark Bright
CONTRAST
Lower Higher
SHARPNESS
Soft Sharp
COLOR
Less More
TINT
Red Green
V.POSIT
(V.POSITION)
Moves the picture up or down. Or automatic control.
H.POSIT
(H.POSITION)
Moves the picture left or right. Or automatic control.
H.PHASE
Decreases the picture flicker. Or automatic control.
H.SIZE
Widens of Narrow the horizontal size of the picture. Or automatic control.
COLOR BAL
(COLOR BALANCE)
for Red for Blue
How to use the SET UP menu
1. Bar display items (VOLUME, BRIGHT etc.)
Move the green cursor to the item you wish to adjust, then move the MENU buttons on the unit, or the
DISK PAD, to left and right to adjust the length of the bar display.
2. Numerical display items (V POSIT, H POSIT etc.)
Use either manual operation or auto set-up.
< Manual Operation >
Adjust optional items manually.
(1) Use the MENU buttons on the unit or the DISK PAD on the remote
control to move the green cursor to the number of the item you wish to
adjust.
(2) With the green cursor on the number, use the MENU buttons on the
unit or the DISK PAD on the remote control to raise or lower the
value.
SETUP INPUT IMAGE OPT.
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
123
111
31
1024
R B
AUTO
Downloaded from www.Manualslib.com manuals search engine