Hitachi EDPJ32 Projector User Manual


 
15
ENGLISH
Preparations
Example of computer signal
• Depending on the input signal, full-size display may not be possible in
some cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to XGA
(1024x768), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
About Plug-and-Play capability
Plug-and-Play is a system composed of a computer, its operating system and
peripheral equipment (i.e. display devices). This projector is compatible with
VESA DDC 2B. Plug-and-Play can be achieved by connecting this projector to
computer that is VESA DDC (display data channel) compatible.
Please take advantage of this function by connecting the accessory RGB
cable to the RGB port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
Please use the standard drivers in your computer as this projector is a Plug-
and-Play monitor.
NOTE
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode
720 x 400 37.9 85.0 VESA TEXT
640 x 480 31.5 59.9 VESA VGA (60Hz)
640 x 480 37.9 72.8 VESA VGA (72Hz)
640 x 480 37.5 75.0 VESA VGA (75Hz)
640 x 480 43.3 85.0 VESA VGA (85Hz)
848 x 480 31.0 60.0 VESA -
800 x 600 35.2 56.3 VESA SVGA (56Hz)
800 x 600 37.9 60.3 VESA SVGA (60Hz)
800 x 600 48.1 72.2 VESA SVGA (72Hz)
800 x 600 46.9 75.0 VESA SVGA (75Hz)
800 x 600 53.7 85.1 VESA SVGA (85Hz)
832 x 624 49.7 74.6 - Mac 16” mode
1024 x 768 48.4 60.0 VESA XGA (60Hz)
1024 x 768 56.5 70.1 VESA XGA (70Hz)
1024 x 768 60.0 75.0 VESA XGA (75Hz)
1024 x 768 68.7 85.0 VESA XGA (85Hz)