47
2
6. Sending Originals
Direct transmission
In the direct transmission mode, the remote Fax is immediately dialed, and the originals are sent after a
successful connection with the remote Fax that has been completed.
• Users can check immediately if the original has been sent to the remote Fax.
• Once scanned, the originals are not stored in the memory.
• Users can specify only one remote Fax at one time.
• After a page has been sent, the next page is scanned. It takes longer to scan all pages.
• If an original is placed on the original glass, the scanning conditions can be changed for each page.
( P.33 “Setting the scanning conditions for each page”)
* Memory transmission is set as the initial setting. Changing the initial setting to direct transmission
( P.146 “1.Setting the Initial Transmission Mode”)
Direct transmission by optional setting
1
Place the original(s).
• P.24 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [ADDRESS] button to enter the address menu, and then
press the [OPTION] button.
4
Press the [DIRECT TX] button, set the other transmission conditions,
then press the [ENTER] button.
• P.27 “4.Setting the Transmission Conditions”