Filter
Top Products
3-34
5. Selecting the Finishing
Chapter 3Making Copies
Auto Dual Function
Though the Top Offset Tray can hold only up to 100 sheets, the Auto Dual function permits making
copies of up to 2,100 sheets.
<Only when the Finisher FN-3 is mounted>
* Only 11
″×
17
″
size paper can be Z-folded. Therefore, if a stack of mixed-size originals (11
″×
17
″
and
other sizes) is copied in Mixed Original Dtection mode, the copy set will contain a mix of Z-folded
and unfolded copies.
If a stapling sequence is attempted and the number of sheets is greater than the stapling capacity, Stapling
is automatically canceled and the Finisher is set into the Sort or Group mode, sorting or grouping copies
using the Auto Dual function (but no stapling action takes place).
Auto Dual Function in Finishing Mode
Paper Size
Top Offset
Tray
Bottom Offset Tray
Corner Staple 2-Point Staple
Non-Sort
Sort
Group
LetterC 100 sheets 2000 sheets (no staple)
11″×17″L, LegalL,
LetterL
100 sheets 1000 sheets (no staple)
5-1/2″×8-1/2L,
5-1/2″×8-1/2″C
100 sheets -
Crisscross Sort LetterL, LetterC 100 sheets 1000 sheets (no staple)
Staple
Sort
Group
Corner 11″×17″L to Letter - 100 sets or 1000 sheets -
Side
LetterC - - 200 sets or 2000 Sheets
11″×17″L, LegalL,
LetterL
- - 200 sets or 1000 Sheets
Center 11″×17″L, LetterL - - 100 sets or 1000 sheets
Folding
Crease
Staple 11″×17″L, LetterL - - 100 sets or 1000 sheets
Half-
Fold
Non-Sort, Sort, Group
11″×17″L 10 sheets 50 sheets (no staple)
Staple 11″×17″L - - 100 sheets
Z-
Fold
Non-Sort, Sort, Group
11″×17″L 10 sheets 50 sheets (no staple)
Staple 11″×17″L - 100 sheets 100 sheets
Mixed Orig. Detection
Z-Folded
+
Unfolded*
11″×17″ (Z-Folded) +
LetterC
*Z-Folded: 5 sheets/set
Unfolded*:
2 sheets/set
30 sheets
Z-Folded: 100 sheets
Z-Folded + Unfolded*: 1000 sheets
(no staple)
-
Z-Folded: 100 sheets
Z-Folded + Unfolded*:
1000 sheets
Z-Folded 100 sheets
Z-Folded +Unfolded*:
2000 sheets
Auto Dual Function in Stapling