Filter
Top Products
Quantum System
Quick-Start Guide - Operator
2
Welcome!
This Quick-Start Guide is designed to get you up and running and to
use as a handy reference. Refer to the companion Operator and
Supervisor Manuals on CD for complete details.
The Quantum Scale Printer System is perfect for your over-the-counter
weighing applications. This state-of-the-art weighing system can
handle a broad variety of products for deli, bakery, produce, fish and
cheese departments. It can also function in a Prepack Scale mode
when necessary.
The easy-to-use control panel allows for productive operation. All
necessary operator data appears on the screen, and Function Keys (F1–
F8) provide easy access to PLU information.
Topics
The following topics are covered in this Quick-Start Guide:
Topic
Help
Reset
Power Up the System
Rezero the Scale
Load Labels
Cleaning & Sanitizing
Clean the Printhead
How to Start a Run
Page
3
3
3
5
5
6
7
7
FCC Note
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference; in which case, the user will be
required to correct the interference at his own expense.
Verify Correctness
of Weight & Price
Verification of information on labels should be made routinely. Check
the multiplication of price-per-pound times weight, and check the
indicated weight against printed weight. Weigh the same package
several times to verify consistency. Keep in mind that some packages
which weigh near the middle of the 0.01-lb increment will normally
vary up or down by 0.01-lb. Greater variation than 0.01-lb indicates a
need for adjustment of the system. In such cases, or whenever
necessary, contact your authorized Hobart service representative.