Homelite HL-1250 Printer User Manual


 
10/10/03
CHAPTER 2 "PCL" - 19
4.1.5. Top offset registration
Esc&
l
#Z (27)(38)(108)#(90) <1Bh><26h><6Ch>#<5Ah>
# stands for the distance in decipoints (1/720") that the top edge of the logical page is to be moved.
Values for # may be in the range -32,767 to 32,767.
The distance specified is relative to the logical page’s current position.
# can be positive or negative. Use a positive number to move the logical page downwards on the physical
page, and a negative number to move it upwards.
4.1.6. Simplex/duplex printing
(For HL-1660e/2060/3400CN/1650/1670N/3260N/2460/7050/1850/1870N)
Esc&
l
#S (27)(38)(108)#(83) <1Bh><26h><6Ch>#<53h>
# can be 0, 1, or 2.
# = 0 indicates Simplex printing.
# = 1 indicates Duplex - Long edge binding printing.
# = 2 indicates Duplex - Short edge binding printing.
If the optional duplex unit is not installed onto the printer, this mode is set to Simplex mode.
This command setting is not saved in the printer's NV-RAM.
4.1.7. Paper side selection
Esc&a#G (27)(38)(97)#(71) <1Bh><26h><61h>#<47h>
# can be 0, 1, or 2.
# = 0 indicates the next side. If there is a page being processed, the printer finishes the processing of that
page. If there are no pages being processed, this command is ignored.
# = 1 indicates the front face.
If the currently processing page is an odd page, the printer finishes the processing of that page and attaches
a dummy page.
If the odd page has already been processed onto the page and the even page has not been processed yet, only
a dummy page is attached.
If the currently processing page is an even page, the printer finishes the processing of the page.
If both an even and odd page have been processed and the next odd page has not been processed yet, this
command is ignored.
Positive
N
e
g
ative
[Long Edge Binding]
[Short Edge Binding]