Filter
Top Products
3
Reading Techniques
The view finder
projects an aiming
beam that should
be centered over
the barcode, but
can be positioned
in any direction for
a good read.
Hold the scanner
over the barcode,
pull the trigger, and center the aiming beam on the
barcode.
The aiming beam is smaller when the scanner is
closer to the code and larger when it is farther from
the code. Hold the scanner close to smaller
barcodes, and farther away from large barcodes to
get a proper read.
If the barcode is highly reflective (e.g., laminated),
you may need to tilt the scanner at an angle so the
barcode can be scanned.
Standard Product Defaults
The following barcode resets all standard product
default settings.
Standard Product Defaults