Filter
Top Products
5
We recommend use of Honeywell peripherals, power cables, and
power adapters compiled with L.P.S. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not
covered by the warranty.
Step 3: Boot the Terminal
If the terminal is not connected to an external power source, it begins
booting once you push the Power button. If the terminal is connected to
an external power source (e.g., power cable, HomeBase), it will
automatically reboot. Do NOT press any keys or interrupt the boot
process.
When the boot process is complete, the Home screen appears, and the
terminal is ready for use.
Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of
batteries:
• Do not disassemble or open crush, bend or deform, puncture or
shred.
• Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, expose to
fire, explosion or other hazard.
• Improper battery use may result in a fire, explosion or other hazard.
• We recommend use of Honeywell Li-Ion battery packs. Use of any
non-Honeywell battery may pose a personal hazard to the user.
• Only use the battery for the system for which it is specified. Do not use
a battery in any other manner outside its intended use in Dolphin
terminals and peripherals.
• Ensure all components are dry prior to mating batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
• Replace defective batteries immediately; using a defective battery
could damage the Dolphin terminal.
• Never throw a used battery in the trash. Promptly dispose of used
batteries in accordance with local regulations.
• Do not short-circuit a battery or throw it into a fire; it can explode and
cause severe personal injury. Do not allow metallic conductive objects
to contact battery terminals.
• Don’t use a battery in any other manner outside its intended use in
Dolphin terminals and peripherals.
• Excessive discharge damages a battery. Recharge the battery when
your terminal indicates low battery power.
• If you observe that the Honeywell battery supplied is physically
damaged in some way, send it to Honeywell International Inc. or an
authorized service center for inspection, see Technical Assistance on
page 7
!