Filter
Top Products
2 - 4
Connect to Terminal
Dolphin 70e in Wearable Sled
HX2 / HX3
When you want to switch connectors from left to right, or vice versa, first gently press downward on the Retaining Clip, then
pinch and pull the cable connector (not the cable!) straight up and away from the Ring Scanner. Do not use a metal object,
or extreme force, to remove the cable connector from the Ring Scanner.
Re-connect cables and reassemble the Ring Scanner body-worn components.
Connect
1. Slide the ring scanner cable connector into the bottom
of the sled until the connector ring clicks shut.
Disconnect
1. To eject the ring scanner, open the connector ring with
one hand, pulling toward the outside of the sled.
2. Push the ring scanner connector out of the sled.
1. Connect
2. Ring on Left Hand
3. Ring on Right Hand
4. Press Down
5. Remove
1
2