Filter
Top Products
If an accident has occurred in fresh or salt water…
• Recovered electronic components should be placed in a
container filled with 2 MOhm de-ionized water.
- Bottled drinking water is acceptable, provided the water has been
produced using a reverse osmosis (RO) process, as opposed to
bottled spring water.
- Do not use tap water, distilled water or medical grade 10 MOhm
water.
• If de-ionized or RO water is not available at the accident site,
clean and ship the component in the water it was found in – salt
or fresh.
-
Never try to transfer a component to another medium (such as air)
-
Never
try
to
transfer
a
component
to
another
medium
(such
as
air)
.
- Never remove components from water and allow to "air dry“, or
attempt to use uncontrolled heating devices to dry the components.
27
File Number
27
Use de-ionized or RO water, NOT tap or distilled water