Honeywell Q7130A Network Card User Manual


 
INSTALLATION INSTRUCTIONS
63-2235-05
Q7130A, Q7230A, Q7330A
Modutrol IV Interface Modules
APPLICATION
The Q7130, Q7230, and Q7330 Modutrol IV Interface
Modules are used with Series 90 Modutrol IV Motors (M91XX)
for conversion to electronic (Series 70) control.
FEATURES
Mounts inside the wiring box of any Series 90 Modutrol
IV Motor (M91XX models). Module protected from
weather by the Modutrol IV NEMA 3 wiring box.
Mates to quick-connect terminals in motor wiring box
and provides screw terminals for control wiring
connections.
Features solid state circuitry with surface mount
components.
Plastic enclosure provides easy handling and
protection for circuitry.
Q7130A provides selectable voltage range (4-7, 6-9, or
10.5-13.5 Vdc). Adapts M91XX Modtrol IV Motor to
function as M71XX model for M734H,J, M744D,
M745G,P replacements. Includes reversing switch to
allow replacement of electrically normally open or
electrically normally closed motors.
Q7230A provides current or voltage control (4-20 mA
and 2-10 Vdc) with adjustable zero and span. Adapts
the M91XX Modutrol IV Motor to function as M72XX
model for M744S,T,Y or M745S,T,Y replacements.
Includes reversing switch to allow replacement of
electrically normally open or electrically normally
closed motors.
Q7330A is an interface to W936 and W945 controls.
Adapts the M91XX Modutrol IV Motor to function as
M73XX model for M734D, M744A, M745A replacements.
Q7130A Q7230A
Q7330A