Honeywell Q7751A Network Router User Manual


 
Q7751A ROUTER
Home and Building Control Home and Building Control Honeywell Asia Pacific Inc.
Honeywell Inc. Honeywell Limited-Honeywell Limitee Room 3213-3225
Honeywell Plaza 155 Gordon Baker Road Sun Hung Kai Centre
P.O. Box 524 North York, Ontario No. 30 Harbour Road
Minneapolis, MN 55408-0524 M2H 3N7 Wanchai
Hong Kong
Honeywell Latin American Region Honeywell Europe S.A.
480 Sawgrass Corporate Parkway 3 Avenue du Bourget
Suite 200 1140 Brussels
Sunrise, FL 33325 Belgium
74-2952—1 J.D. Rev. 6-99
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
www.honeywell.com
Power Supply
The Q7751A Router requires 2 VA at an operating voltage of
16 to 30 Vdc or Vac. There is a power ON LED located on
the front panel.
Status Information
Two service LEDs (channel 1 and channel 2) light to provide
service request information for each segment.
The Router Activity LED lights when transferring from one
channel to another.
Front panel has the Service Request button for broadcasting
the Neuron ID on the network.
Mounting Options
The type 2 base plate mounts to either a U.S. 4 in. square,
2 in. deep (10.16 cm x 5.08 cm) electrical box, U.S. double
gang electrical box or an IP-65 (NEMA 4) enclosure.
Dimensions (HxWxD)
3-15/16 x 3-15/16 x 1-3/4 in. (100.0 x 100.0 x 44.5 mm).
Environmental Ratings:
Operating and shipping temperature
-40 to +185°F (-40 to +85°C).
Relative Humidity
-10 to 95% at 122°F (50°C).
Approval Bodies
U.L. LP Router 146747, Volume 2, Section 1.
L
ON
W
ORKS
® and Neuron® are registered trademarks of
Echelon® Corporation.