Filter
Top Products
0702 3
FA 400.2
Danger of injury
Do not reach into the paper feed
opening.
Splinters can cause injury
Before destroying credit cards and
store cards, CD-ROMs or fl oppy disks,
you must fi t a splinter guard (strip
curtain, order no. 1.513.050.445).
Danger of injury during intake
Do not go near the paper feed open-
ing with long hair, loose clothing, ties,
scarves, necklaces, bracelets etc.
Do not destroy any material which
might become tangled, such as tapes,
binder ties or foil.
Switch off the shredder and pull
out the power plug
before moving or cleaning the shred-
der, or any other task outside its
normal scope of use.
Maintenance and service tasks may
only be performed by HSM customer
service and service engineers of our
dealers.
1. Proper use, warranty
The shredder is exclusively designed for destroying
paper and cardboard, as well as store cards, credit cards,
CD-ROMs and fl oppy disks. Its sturdy drive mechanism is
not damaged by paper clips and staples.
Our general business conditions are applicable. We pro-
vide a one year warranty for the document shredder. The
warranty period is 6 months when used in multiple shifts.
This warranty excludes wear, damage due to improper
handling, natural depreciation, and actions taken by third
parties.
2. Safety instructions
Caution:
It is prohibited to operate one only machine
of a combination-version machine. Only
the combination of document shredder and
HSM baling press fulfi ls the requirements of
EN 294 (Safety clearances).
• Read the operating manual before starting up the
shredder.
• Do not remove or modify safety devices which guar-
antee the safe operation of the machine.
• Observe all safety instructions attached to the ma-
chine.
• The shredder may not be operated by anyone under
16 years of age.
• Only open the front door once the machine has come
to a standstill.
• Carry out inspection and maintenance regularly.
• Switch off the shredder, disconnect the power plug
and call customer service in the following circum-
stances:
- Power cables or plugs are damaged
- Liquid has entered the shredder
- The shredder has been exposed to rain
- The machine does not work properly despite the
operating manual having been observed
- The shredder has been damaged
Operating controls for your safety
Emergency stop button
In the event of danger, press the
emergency stop button immediately.
This switches off the shredder, and
stops the cutting block and feed belt.
Main switch (only Solo-version)
In the event of danger, turn the main
switch to “0”.
You can secure the main switch in
this position with a padlock to prevent
restarting.