Filter
Top Products
BioDisk from Hypertec - Quick User Guide
D. Getting Started
6
D1. Registering Finger Prints (ctd)
Step 3
Step 4
The Finger Print set-up screen will come up
automatically.
Select an un-registered finger from the
screen, the finger will be highlighted in green.
Once selected, you are asked to enrol a
fingerprint. Press the finger firmly onto the
sensor and swipe. Each swipe should last 1-2
seconds. Each finger print needs to be
swiped successfully 3 consecutive times for
enrolment to work. If successful, numbers
1,2,3 will show on the left hand side.