Filter
Top Products
Configuring the ATM Module 3
c
Ensure that the Port ID is set to the ATM port
number. The ATM port numbers are as follows:
Port
13
on an IBM 8271 Nways Ethernet LAN
Switch Model 612 and IBM 8271 Nways Ether-
net LAN Switch Model 712
Port
25
on an IBM 8271 Nways Ethernet LAN
Switch Model 624 and IBM 8271 Nways Ether-
net LAN Switch Model 524
d
Select the STATS button.
e
The ATM Port Statistics Screen is displayed.
f
Select the LEC button to displays statistics and
status information for the default VLAN that is
associated with the default ELAN (admin1).
An example of the ATM VLAN LEC Status screen is
shown in Figure 3.
Figure 3
ATM VLAN LEC Status Screen
g
If the default VLAN’s
LEC State
field displays a
value other than
Active
, and the
Last LEC Failure
Reason
shows a value other than
None
, an error
has arisen; see “Troubleshooting”.