Filter
Top Products
Moving guide
Page 1 of 1
Moving guide
Follow these guidelines to move the printer within the office or to prepare the printer for shipment.
Warning: Follow these guidelines to avoid injuring yourself or damaging the printer.
• Always use at least two people to lift the printer.
• Always turn off the printer using the power switch.
• Disconnect all cords and cables from the printer before attempting to move the printer.
• Failure to repackage the printer properly for shipment can result in damage to the printer not covered by
the printer's warranty.
• Damage to the printer caused by improper moving is not covered by the printer's warranty.
Moving the printer within the office
The printer can be safely moved from one location within an office to another following these precautions:
• The printer must remain in an upright position.
• Any cart used to move the printer should have a surface able to support the full footprint of the printer.
• Severe jarring movements may cause damage to the printer and must be avoided.
Preparing the printer for shipment
To transport the printer by vehicle or by commercial carrier, the printer must be repackaged for shipment using
the proper packaging. The printer package must be securely fastened to its pallet. Do not use a shipping or
transport method that requires the printer to be shipped without a pallet. The printer must stay upright throughout
the shipment. If you do not have all the original packaging, contact your local service representative to order the
repackaging. Additional instructions for repackaging the printer are provided in the repackaging Kit.