IBM 6347 Computer Hardware User Manual


 
POST Error Code FRU/Action
10461
Drive format error
1. Run Enhanced Diagnostics
10462
Controller seek error
1. Run Enhanced Diagnostics
10464
Hard Drive read error
1. Run Enhanced Diagnostics
10467
Drive non-fatal seek error
1. Run Enhanced Diagnostics
10468
Drive fatal seek error
1. Run Enhanced Diagnostics
10469
Drive soft error count exceeded
1. Run Enhanced Diagnostics
10470, 10471, 10472
Controller wrap error
1. Run Enhanced Diagnostics
10473
Corrupt data. Low level format might be
required
Information only
10480
1. Hard Disk Drive (ESDI)
2. Drive Cable
3. System Board
10481
ESDI drive D seek error
1. Run Enhanced Diagnostics
10482
Drive select acknowledgement bad
1. Run Enhanced Diagnostics
106X1
1. Check Configuration
2. Ethernet Adapter
10635
1. Power-off computer, wait ten seconds
then power-on the computer
2. Ethernet Adapter
10651, 10660
1. Check Cables
2. Ethernet Adapter
106XX
Not listed above
1. Ethernet Adapter
107XX
1. 5.25-inch External
Diskette Drive
2. 5.25-inch Diskette
Drive Adapter/A
109XX
Check the adapter cables
1. ActionMedia
Adapter/A
2. System Board
3. Riser card
112XX
This adapter does not have cache
1. SCSI Adapter
2. Any SCSI Device
3. System Board
4. Riser card
102 Hardware Maintenance Manual