Filter
Top Products
64 IBM Desktop System HMM
Memory
001 - START
•
Power off the system unit.
•
Insert the diagnostics CD into the CD-ROM
drive.
•
Ensure that all DIMMs are installed correctly.
•
Power on the system unit.
•
Take note of any messages, error codes, or
symptoms.
002 - DO YOU RECEIVE POST MEMORY ERROR
MESSAGE? (YES, READ AHEAD. NO, GO TO
STEP 003)
•
Enter BIOS Setup Utility then reboot the system.
Take note of any messages, error codes, or
symptoms. If the error message remains, go to
step 005.
003 -
•
Follow the screen instructions to run the Memory
test.
004 - DOES THE MEMORY TEST COMPLETE
WITHOUT AN ERROR? (YES, READ AHEAD. NO,
GO TO STEP 005)
•
The system memory is now functioning correctly. If
you suspect an intermittent problem, run the
Memory test again.
•
End.
005 -
•
Replace the DIMM that the memory test calls out
and then re-run memory test.
•
If all DIMMs on the system board, have been
replaced and the problem remains, replace system
board.
•
Go to step 001.