Filter
Top Products
2. You might have to remove an adapter to gain access to the DIMM slots. See
“Installing adapters” on page 58.
3. Locate the DIMM connectors. See “Identifying parts on the system board” on
page 55.
4. Open the retaining clips.
5. Make sure the notches in the DIMM align with the tabs on the connector. Push
or insert the DIMM straight down into the connector until the retaining clips
close.
What to do next:
v Replace any adapters that were removed.
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
cables” on page 67.
Chapter 3. Types 2296 and 8434 57