Filter
Top Products
3
DEUTSCH
APPENDIX ESPAÑOLITALIANO
SVENSKA
ENGLISH
FRANÇAIS
PORTUGUESE
Monitor Installation Diskette for
Windows 95 or 98 users
When you start your system after connecting the
monitor, Microsoft® Windows® 95 or Windows 98
detects that you have added new hardware and selects
a default setting. For best performance, install the files
from the diskette supplied with your IBM monitor using
the following instructions:
1. Click Start.
2. Select Settings.
3. Click Control Panel. The Control Panel window
opens.
4. Double-click the Display icon. The Display
Properties window opens.
5. Click the Settings tab.
6. Click Advanced Properties.
7. Click the Monitor tab.
8. Click Change.
9. Insert the diskette into the diskette drive and then click
Have Disk.
10. Click OK.
11. Select your monitor type and then click OK. The files
will be copied to your computer from the diskette.
12. Close all windows and remove the diskette from the
diskette drive.
13. Restart the system.
Monitor Installation Diskette for
Windows 2000 users
When you start your computer after connecting the
monitor, Microsoft Windows 2000 Professional detects
that you have added new hardware and selects a
default setting. For best performance, install the files
from the diskette supplied with your IBM monitor using
the following instructions:
1. Click Start.
2. Select Settings.
3. Click Control Panel. The Control Panel window
opens.
4. Double-click the Display icon. The Display
Properties window opens.
5. Click the Settings tab.
6. Click Advanced.
7. Click the Monitor tab.
8. Click Properties.
9. Click the Driver tab, and then click Update Driver to
open the Upgrade Device Driver Wizard window.
10. Click Next.
11. Verify that Display a list of the known drivers for
this device so that can choose a specific driver is
selected.
12. Click Next.
13. Insert the diskette into the diskette drive and click
Have Disk.
14. Click OK.
ESetup.fm Page 3 Friday, April 14, 2000 12:56 PM