IBM UPS750TLV Power Supply User Manual


 
12
Step 4
750TLV and 750THV Models
Pull the battery module out of the uninterruptible
power supply; the battery connector will discon-
nect from port.
1000TLV and 1000THV Models
A.
Pull the battery module from the uninterruptible
power supply until the battery cables are visible.
Disconnect the battery cable terminals.
B.
Remove the battery module from the uninterrup-
tible power supply.
1500TLV and 1500THV Models
A.
Pull the battery module from the uninterruptible
power supply until the back of the module is
flush with the outer edges of the uninterruptible
power supply.
B.
Disconnect the battery connector.
R
EPLACING THE BATTERY MODULE
To replace the battery module, reverse the directions for Removing the Front Bezel and Battery Module.
Attention: 1000TLV and 1000THV models only: When reconnecting the battery cables, connect cables to the correspond-
ing color terminals.
Battery
Terminals
Battery
Connector