Filter
Top Products
After you press the Enter key from the Change Restore Options display or the Change OS/400 Installing
Options display, the Change Major System Options display is shown (example only):
+————————————————————————————————————————+
| Change Major System Options |
| |
| Installation profile.......: INSTALLX |
| |
| Type choices, press Enter. |
| |
| Enable automatic |
| configuration... *SAME *SAME, Y=Yes, N=No |
| |
| Device configuration |
| naming ...... *SAME *SAME, *NORMAL |
| *S36, *DEVADR |
| |
| Default special |
| environment.... *SAME *SAME, *NONE, *S36 |
| |
| |
| |
| |
| |
| |
| F3=Exit F12=Cancel |
| |
+————————————————————————————————————————+
The Change Major System Options display contains the following information:
v Installation profile
This field is an output-only field. The system automatically displays the installation profile name
(INSTALLX in the example) you created or chose on the Work with Installation Profiles display.
v Enable automatic configuration
The value *SAME means that the current values are being used at the target site system without
changing those values. The value Y (Yes) automatically configures local devices. An N (No) indicates no
automatic configuration. Specifying a value other than *SAME causes the QAUTOCFG system value to
be changed at the target site system. For more information about automatic configuration, see Local
Device Configuration, SC41-5121.
v Device configuration naming
The value *SAME means using the current values at the target site system without changing those
values. The value *NORMAL uses a naming convention unique to the iSeries server. For example,
DSP01 and PRT01 for display stations and printers, TAP01 and DKT01 for media and diskettes. The
value *S36 uses a naming convention similar to System/36. For example, W1 and P1 for display
stations and printers, T1 and I1 for media and diskettes. The value *DEVADR uses device names that
are derived from resource names. Specifying a value other than *SAME causes the QDEVNAMING
system value to be changed at the target site system. For more information about device configuration
naming, see Local Device Configuration, SC41-5121.
v Default special environment
The value *SAME means using the current values at the target site system without changing those
values. The value *NONE indicates there is no special environment. The value *S36 sets up the
System/36 environment. Specifying a value other than *SAME causes the QSPCENV system to be
changed at the target site system.
Change Licensed Program Options Display
After you press the Enter key from the Change Major System Options display, the Change Licensed
Program Options display is shown (example only):
Using central site distribution to install multiple iSeries servers 33