Filter
Top Products
For a list of language feature codes, place the cursor in this field and press the Help key.
v Clear job and output queues
This is an input field. If you want to clear the job and output queues during the installation, type Y (Yes).
If you do not want to clear the job and output queues, type N (No).
Change Major System Options Display
After you press the Enter key from the Change Restore Options display or the Change OS/400 Installing
Options display, the Change Major System Options display is shown (example only):
+————————————————————————————————————————+
| Change Major System Options |
| |
| Installation profile.......: INSTALLX |
| |
| Type choices, press Enter. |
| |
| Enable automatic |
| configuration... *SAME *SAME, Y=Yes, N=No |
| |
| Device configuration |
| naming ...... *SAME *SAME, *NORMAL |
| *S36, *DEVADR |
| |
| Default special |
| environment.... *SAME *SAME, *NONE, *S36 |
| |
| |
| |
| |
| |
| |
| F3=Exit F12=Cancel |
| |
+————————————————————————————————————————+
The Change Major System Options display contains the following information:
v Installation profile
This field is an output-only field. The system automatically displays the installation profile name
(INSTALLX in the example) you created or chose on the Work with Installation Profiles display.
v Enable automatic configuration
The value *SAME means that the current values are being used at the target site system without
changing those values. The value Y (Yes) automatically configures local devices. An N (No) indicates no
automatic configuration. Specifying a value other than *SAME causes the QAUTOCFG system value to
be changed at the target site system. For more information about automatic configuration, see Local
Device Configuration, SC41-5121.
v Device configuration naming
The value *SAME means using the current values at the target site system without changing those
values. The value *NORMAL uses a naming convention unique to the iSeries server. For example,
DSP01 and PRT01 for display stations and printers, TAP01 and DKT01 for media and diskettes. The
value *S36 uses a naming convention similar to System/36. For example, W1 and P1 for display
stations and printers, T1 and I1 for media and diskettes. The value *DEVADR uses device names that
are derived from resource names. Specifying a value other than *SAME causes the QDEVNAMING
system value to be changed at the target site system. For more information about device configuration
naming, see Local Device Configuration, SC41-5121.
v Default special environment
40 iSeries: Using central site distribution to install multiple iSeries servers