Filter
Top Products
25
Active: For activation of Print Server (No, Yes)
Protocol: Setup Protocol (Rtty/Parallel) for Remote
TTY < go to remote TTY for Unix System> (LPD) for
Normal conneciton
Default Queue Name: <See 4.1.4a Print Server>
Printer: Selection for printer connections. (Parallel,
Ser. 1, Ser. 2)
Notes: If you intend to use Serial 1 or Serial 2 for
Printing, they must be declared as Printer in the Port
Configuration
4.1.4.b Print Screen:
While using the SpotLine M110 terminal in a network, you may
not always have a printer connected to it so the Print Screen function
has been modified to allow the selection of any printer in the network to
be designated for printing the screen. You simply select the host
computer and the queue name of the printer you want to use in that host.
CAUTION: You must make sure the SpotLine terminal has been
given permission to use this printer.
At any time when the terminal is connected to a server, it is possible to print the
contents of the screen by pressing:
System Key + P
( Note: for firmware version 4.1 use Scroll + Alt + Print Screen )
Active
No
Yes
Protocol:
Rtty/Parallel
LPD
Printer
Parallel
Serial 1
Serial2