IBM MDS 9509 Computer Drive User Manual


 
For more information
Contact your IBM representative or
IBM Business Partner, or visit:
ibm.com/systems/storage/san/ctype/
© Copyright IBM Corporation 2008
IBM Systems and Technology Group
Route 100
Somers, New York 10589
Produced in the United States of America
October 2008
All Rights Reserved
IBM, the IBM logo, ibm.com and System
Storage are trademarks or registered
trademarks of International Business Machines
Corporation in the United States, other
countries or both. If these and other
IBM trademarked terms are marked on their
first occurrence in this information with a
trademark symbol (® or ™), these symbols
indicate U.S. registered or common law
trademarks owned by IBM at the time this
information was published. Such trademarks
may also be registered or common law
trademarks in other countries. A current list of
IBM trademarks is available on the Web at
"Copyright and trademark information" at
ibm.com/legal/copytrade.shtml.
Cisco and IOS are registered trademarks of
Cisco Systems, Inc. and/or its affiliates in the
U.S. and certain other countries.
Intel is a trademark of Intel Corporation in the
United States, other countries or both.
Microsoft, Windows and Windows NT are
trademarks of Microsoft Corporation in the
United States, other countries or both.
Linear Tape Open, LTO and Ultrium are
trademarks of Hewlett Packard, IBM and
Certance in the United States, other countries
or both.
Linux is a trademark of Linus Torvalds in the
United States, other countries or both.
Other company, product and service names
may be trademarks or service marks of others.
This document could include technical
inaccuracies or typographical errors. IBM may
not offer the products, services or features
discussed in this document in other countries,
and the product information may be subject
to change without notice. Consult your local
IBM business contact for information on the
product or services available in your area. Any
statements regarding IBM’s future direction and
intent are subject to change or withdrawal
without notice, and represent goals and
objectives only. The information contained in this
document is current as of the initial date of
publication only and is subject to change
without notice. All performance information
was determined in a controlled environment.
Actual results may vary. Performance
information is provided “AS IS” and no
warranties or guarantees are expressed or
implied by IBM. Information concerning non-
IBM products was obtained from the
suppliers of their products, their published
announcements or other publicly available
sources. Questions on the capabilities of the
non-IBM products should be addressed with
the suppliers. IBM does not warrant that the
information offered herein will meet your
requirements or those of your distributors or
customers. IBM provides this information “AS
IS” without warranty. IBM disclaims all
warranties, express or implied, including the
implied warranties of noninfringement,
merchantability and fitness for a particular
purpose or noninfringement. IBM products are
warranted according to the terms and
conditions of the agreements under which they
are provided.
1
For complete and current Cisco specifications,
please visit www.cisco.com/go/ibm/storage.
2
Because this switch is designed with side-
to-side airflow, Cisco recommends a minimum
air space of 16 cm (6 in) between walls and the
chassis air vents, and a minimum separation of
30 cm (12 in) between two chassis to prevent
overheating.
3
For the most current list of supported servers
and storage, please visit ibm.com/systems/
storage/san/ctype/.
TSD00070-USEN-11