IBM MT 9448 Laptop User Manual


 
1030 Hard disk drive cover, hard disk drive, and hard disk
drive rubber rails
For access, remove this FRU:
v “1010 Battery pack” on page 56
Attention
v Do not drop the hard disk drive or apply any physical shock to it. The
hard disk drive is sensitive to physical shock. Improper handling can cause
damage and permanent loss of data.
v Before removing the drive, have the user make a backup copy of all the
information on it if possible.
v Never remove the drive while the system is operating or is in suspend
mode.
1
Step Screw (quantity)
1 Hard disk drive screw (1) or security screw (1)
Note: Use a 2.5-mm Allen wrench to remove the security screw.
(continued)
Removing and replacing a FRU
58 MT 8747, 8749, 9440, 9441, 9442, 9443, and 9448