IBM SAN32M-2 Switch User Manual


 
For more information
Contact your IBM representative or
IBM Business Partner, or visit:
ibm.com/san/m_type
© Copyright IBM Corporation 2005
IBM Systems and Technology Group
5600 Cottle Road
San Jose, CA 95193
U.S.A.
Produced in the United States
July 2005
All Rights Reserved
IBM, the IBM logo, the e-business logo, AIX,
Enterprise Storage Server, _`, iSeries,
Netfinity, pSeries, RS6000, Tivoli, TotalStorage
and xSeries are trademarks or registered
trademarks of International Business Machines
Corporation in the United States, other
countries or both.
Intel, Intel Inside (logos), MMX and Pentium are
trademarks of Intel Corporation in the United
States, other countries, or both.
Java and all Java-based trademarks are
trademarks of Sun Microsystems, Inc. in the
United States, other countries, or both.
Microsoft, Windows, Windows NT, Windows
Server, Windows 2000, Windows 2003 and the
Windows logo are trademarks or registered
trademarks of Microsoft Corporation in the
United States, other countries or both.
Novell and NetWare are registered trademarks
of Novell, Inc., in the United States and other
countries.
Linear Tape Open, LTO and Ultrium are
trademarks of Hewlett Packard, IBM and
Certance in the United States, other countries
or both.
Linux is a trademark of Linus Torvalds in the
United States, other countries, or both.
UNIX is a registered trademark of The Open
Group in the United States and other countries.
Other company, product and service names
may be trademarks or service marks of others.
This document could include technical
inaccuracies or typographical errors. IBM may
make changes, improvements or alterations to
the products, programs and services described
in this document, including termination of such
products, programs and services, at any time
and without notice. Any statements regarding
IBM’s future direction and intent are subject to
change or withdrawal without notice, and
represent goals and objectives only. The
information contained in this document is
current as of the initial date of publication only
and is subject to change without notice.
IBM shall have no responsibility to update such
information.
IBM is not responsible for the performance or
interoperability of any non-IBM products
discussed herein. Performance data for IBM and
non-IBM products and services contained in this
document was derived under specific operating
and environmental conditions. The actual results
obtained by any party implementing such
products or services will depend on a large
number of factors specific to such party’s
operating environment and may vary
significantly. IBM makes no representation that
these results can be expected or obtained in
any implementation of any such products or
services.
MB, GB and TB equal 1,000,000,
1,000,000,000 and 1,000,000,000,000 bytes,
respectively, where referring to storage capacity.
Actual storage capacity will vary based upon
many factors and may be less than stated.
Some numbers given for storage capacities give
capacity in native mode followed by capacity
using data compression technology.
THE INFORMATION IN THIS DOCUMENT IS
PROVIDED “AS-IS” WITHOUT ANY
WARRANTY, EITHER EXPRESSED OR
IMPLIED. IBM EXPRESSLY DISCLAIMS ANY
WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR
NONINFRINGEMENT. IBM products are
warranted according to the terms and
conditions of the agreements (e.g.,
IBM Customer Agreement, Statement of Limited
Warranty, International Program License
Agreement, etc.) under which they are provided.
References in this document to IBM products,
programs or services do not imply that
IBM intends to make such products, programs
or services available in all countries in which
IBM operates or does business. Any reference
to an IBM program or product in this document
is not intended to state or imply that only that
program may be used. Any functionally
equivalent program or product that does not
infringe IBM’s intellectual property rights may be
used instead. It is the user’s responsibility to
evaluate and verify the operation of any non-
IBM product, program or service.
IBM’s customer is responsible for ensuring its
own compliance with legal requirements. It is
the customer’s sole responsibility to obtain
advice of competent legal counsel as to the
identification and interpretation of any relevant
laws and regulatory requirements that may
affect the customer’s business and any actions
the customer may need to take to comply with
such laws. IBM does not provide legal advice or
represent or warrant that its services or
products will ensure that the customer is in
compliance with any law.
TSD01257-USEN-00