Filter
Top Products
Bottom view (with battery pack
installed)
Battery pack
Battery-pack lock
Internal speaker
Setting up your computer
You are now ready to assemble and start your computer.
1
Turn the computer upside down and install the battery
pack as shown.
1
2
2
Slide the battery-pack lock to the locked position.
unlock
lock
3
Turn the computer over again.
4
Connect the external diskette drive.
Attach the cable to the external diskette drive, and then to
the external-diskette-drive connector on the computer.
Press the side of the connector 1 as you connect it to
the devices 2.
External-diskette-drive connector
External-diskette-drive
5
Connect your printer.
If you have a printer, connect one end of the printer cable
to the parallel connector and the other end to your printer.
Then power on the printer.