Filter
Top Products
Connecting to a Microsoft Windows 2000 Advanced or NT 4.0
Server
Microsoft Windows 98 2
nd
edition
Requirements
Operating System Windows 98 2
nd
edition
Driver Version 5.33.00.0050
Driver File IBMTRP5.SYS
Server OS Windows 2000 Advanced or NT 4.0
Server
Client OS Microsoft
Procedure
1. With the HP Vectra turned off, install the network adapter into an available PCI
slot.
2. Connect the network cable to the newly installed network adapter.
3. Connect the WOL cable between the network adapter and the PC motherboard.
4. Power on the machine and boot to Windows.
5. Windows will detect the network adapter as “IBM PCI Token-Ring Adapter,
NDIS4”.
6. Insert the driver disk and click on “Next” to continue the installation.
7. Accept the default selection: “Search for the best driver for your device
(Recommended).” and click “Next”.
8. Select the locations Windows will search for drivers. Accept the default selection:
“Floppy disk drives” and click “Next”.
9. Accept “The updated driver (Recommended)…” by clicking on “Next”.
10. Click on “Next” to install the driver.
11. Click on “Finish” when the driver installation is complete.
12. Remove the driver disk and click on “Yes” when prompted to restart the system.
13. Additional changes in the Network properties, such as: workgroup name,
computer name, TCP/IP properties, etc. may be necessary. Ask your Network
Administrator for more information. After changes are made, a restart will be
necessary.