Filter
Top Products
Chapter 3. Installing internal options — small desktop model
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the
instructions that come with the option.
Removing the cover
Important
Read before removing the cover “Safety Information” on page v and
“Handling static-sensitive devices” on page 8.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Press the buttons on the sides of the computer and pivot the rear end of the
cover up toward the front of the computer.
© Copyright IBM Corp. 2001 17