Filter
Top Products
v Color Temperature: Changes the intensity of the colors. Select a relative warmth
value from the Color Temperature menu, shown in Figure 5-9.
v Color Control: Enables you to individually adjust the gain for the red, green,
and blue colors, as shown in Figure 5-10.
v Video Standard: When the video standard is set to Auto, the projector attempts
to automatically pick the video standard based on the input signal it receives.
(The video standard options may vary depending on your region of the world.
Figure 5-11 provides an example of the possible options.) If the projector is
unable to detect the correct standard, the colors may not look right or the image
may appear “torn.” If this happens, manually select a video standard by
selecting NTSC, PAL, or SECAM from the Video Standard menu.
v Overscan: (This menu is only for video sources.) Removes noise around the
video image.
The following options are only for computer sources:
v Phase: Adjusts the horizontal phase of a computer source.
v Tracking: Adjusts the vertical scan of a computer source.
v Horizontal/Vertical Position: Adjusts the position of a computer source.
Figure 5-9. Color Temperature menu
Figure 5-10. Color Control menu
Figure 5-11. Video Standard menu
5-4 IBM iLV300 Value Data/Video Projector: User’s Guide