Filter
Top Products
ENGLISH
NOTE
For optimal viewing it is recommended to look at the
full face of the monitor, then adjust the monitor's
height and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor’s height up to
130mm. The monitor can also be tilted up to 20°
upward, 5° downward and swiveled 45° to the
right and left.
In order to ensure a healthy and relaxed body
position when using the monitor at visual display
workstations, it is recommended that the adjusted
tilt angle should not exceed 10 degrees. Adjust the
monitor’s angle to your own preference.
Do not touch the LCD screen when you change the
angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your fingers
or hands when you change the angle.
Do not tilt the post beyond 20 degrees except when
repacking the monitor in its box.
To do so may cause the monitor to fall over and
break.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite B2403WS
8 BEFORE YOU OPERATE THE MONITOR
NOTE
130mm
20˚
5˚
45˚ 45˚
Signal Timing
Change to the desired signal timing listed on page 25: COMPLIANT TIMING.
Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
COMPUTER SETTING
NOTE
PLB_E2403WS-e-M021B01.P65 2007/10/05, 9:1412