Filter
Top Products
ENGLISH
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
CAUTION
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<
Installation
>
<Remove>
A
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B
Hold the monitor and push the Stand-Base.
A
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
B
Press the stopper at the bottom of the stand and remove the Stand-Base from the arm.
Stand-Base
Stand
Stand-Base
Stand
Stopper
FITTING AND REMOVAL OF BASE : ProLite E1906S
BEFORE YOU OPERATE THE MONITOR 6