Filter
Top Products
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
CAUTION
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install> <Remove>
1.Put a piece of soft cloth on the table
beforehand to prevent the monitor from
being scratched. Lay the monitor flat on
a table with front face down.
2.Hold the monitor and push the Stand-Arm.
3.Hold the monitor and push the Stand-Base.
1.Put a piece of soft cloth on the table
beforehand to prevent the monitor from
being scratched. Lay the monitor flat on
a table with front face down.
2.Press the stopper at the bottom of the
stand and remove the Stand-Base from
the arm.
3.Press the stopper at the back of the stand
arm and remove the Stand-Arm from the
monitor.
Stand-Base
Stand-Arm
Stand-Bas
e
Stand-Arm
Stopper
S
topper