Filter
Top Products
2
BEFORE YOU OPERATE THE MONITOR
[Stopper] ProLite PB1704S
ProLite PB1904S
Please stand the monitor and then remove
the stopper on the back of the sand slowly.
CONNECTING
・To connect the monitor to your PC
1. Make sure that the PC and the monitor is unplugged.
2. Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a)
3. If you have a graphic card with a digital DVI-D connector (24-pin socket), then
connect one end of the DVI-D cable to the DVI-D connector of your monitor (see
fig. 2b), the other end to the computer.
Figure 2a. Figure 2b.
・Connecting the audio cable
If your computer is equipped with an audio output port, connect one end of the sound
cable to the audio Input connector of the monitor (① in fig. 3) and the other end to the
Line-Out connector of the computer.
Signal cable
DVI-D cable
Connecting the monitor to
the PC
Connection via the DVI-D
interface