Filter
Top Products
9
DIP Switch Assignments
DIP Switch Assignments
A single 10-position DIP Switch is located on the unit to set the configuration. The
switch positions are defined as follows:
Switch # Function Settings Factory Default
1 Host/Remote OFF = Host, ON = Remote OFF
2 Reserved OFF OFF
3 Reserved OFF OFF
4 Reserved OFF OFF
5 Reserved OFF OFF
6 Reserved OFF OFF
7 Reserved OFF OFF
8 Reserved OFF OFF
9 Reserved OFF OFF
10 Reserved OFF OFF
NOTE
Switch #1 must be set to ON at the Remote location.
Switches #2 through #10 are reserved for factory use only and must be OFF for proper
operation.