Filter
Top Products
Draft version 1.7 7
Inetcam® and iMViewer™ are the property of Inetcam, Inc.
may be added by day, by specific date, or always (every day) and then also by time. For
example, if cameras should be available every day from 4 pm. to 6 pm., all days would be
selected and then a range specified from 16:00 to 18:00 hours.
Settings: Camera settings on the Mobile Gateway™ video server default to NTSC and a default
name. To make changes to this settings, click the configure source link. Once this link is selected,
the following options appear:
• Name: Enter the name of the video source that will be displayed in the iMViewer™
camera list. This name may be up to 40 characters.
• Disconnect Viewer After: Enter the maximum amount of time in minutes that a viewer is
allowed to receive video before being required to reconnect to the camera source. Enter
a zero to allow unlimited viewing. This field may be used to prevent viewers from
inadvertently remaining connected to a video source indefinitely.
• Source Type: Select whether the analog video input uses NTSC or PAL format.