Filter
Top Products
2D Barcode Scanning
Using the 2D barcode scanner:
The Linēa-pro 4 2D uses a scan engine that supports one-dimensional
(1D) and two-dimensional (2D) barcode symbols. The effective reading
distance of the barcode reader varies depending on the barcode size.
Scanning 2D Barcodes:
To scan a 2D barcode fist activate the scanner. Then position the scan
head to center the red aiming laser near the center of the barcode and
the illumination box is over the outer edges of the barcode as shown in
the figure below.
Slowly pull back the unit increasing the distance between the barcode
and scan head until the barcode has been read by the scanner.
~ 15-20 cm
Scan button
Figure 11
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 15
Linēa-pro 4 User Manual v1.00