InFocus C300 Projector User Manual


 
WELL-CONNECTED
The ASK C300 can connect to virtually any
source. Ordinary VGA, of course, but also BNC
connectors to easily replace already installed
projectors; fully digital DVI input to give totally
loss-free signals; wide video compatibility, with Y,
Pb, Pr, and RGB component video, HDTV
NETWORK PROJECTOR
Open standard networking with TCP/IP and asset
management through Microsoft’s Management
Console and InFocus’ software.With impressive
3000 ANSI lumens, vivid colours, a contrast ratio
of 800:1, whisper-quiet operation and simply
excellent video display, you get a leading edge
presentation tool that can be connected to your
LAN,WAN,VPN or to the internet.The ASK
C300 combines the latest projection technology
with network control and asset management.
ASSET MANAGEMENT
The standard network connection of the C300
allows command and control through the
corporate network.The projector can be
constantly tracked, keeping control over remaining
lamp life, set up, projector status and use.The
C300 uses open standards to make certain that
the projector can be controlled through any
network.
ASSET MANAGEMENT
The ASK C300 supports standard asset
management over the corporate network.
In this way, remaining lamp life, projector
status and service needs can be monitored
from the IT department. IT can get statistics
on the utilisation of the projectors, track
costs and keep TCO (total cost of
ownership) down, which facilitates planning
and collecting audit information.
The C300 can be configured or re-
configured over the network, which makes
it easier to support the projector.
The C300 supports standard network
connections and protocols.
TCP/IP protocol for connection to
LANs,WANs and the internet.
DHCP – the C300 can be automatically
assigned an IP address from the DHCP
server, or this function can be
overridden and the IP address entered
manually.
System integrators can choose between
controlling the C300 through the
traditional RS232 serial interface, or
through TCP/IP.
Asset management is done through a
Microsoft Management Console snap-in, the
InFocus software.This system allows control
and administration of multimedia projectors
from a remote console. It is designed as a
server-based system to ensure accurate
information regardless of whether a given
projector is on, in stand-by mode, or
completely powered off.
The Filter can easily be taken out for cleaning and
replacement.