Filter
Top Products
26
Advanced Menu
Image:
3D Control:
3D Control: allows you
to enjoy 3D (stereoscopic) content. Your projector
supports two synchronization modes (External Sync and DLP Link™) for
controlling LCD shutter glasses. In addition to the projector, you will need a
pair of 3D shutter glasses, 3D content, and 3D compatible source (and emit-
ter). Ensure the glasses you choose are
co
nsistent with the synchronization
mode you will be using.
3D Sync Invert: (Only applies wh
en 3D control is set to DLP Link™.) If the
image appears to flutter, look odd or if the image depth looks off or you
experience eye strain, turn this feature on to see if the image improves.
Color...
Color: a
djusts a video image from black and white to fully saturated color.
Th
e color setting applies to video sources only.
Red/Green/Blue Gain: adjusts the gain of
the red, green or blue channel of the
image.
Red/Green/Blue Offset: adjusts the offse
t o
f the red, green or blue channel of
the image.
Color Space: applies to c
omputer and component video sources. It allows
you to select a color space that has been specifically tuned for the input signal.
When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer
sources or choose either REC709 or REC601 for component video sources.
Color Temperature:
changes the
intensity of the colors. Select a listed rela-
tive warmth value.
Gamma: s
elect the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint: adjusts the
red-green color balance in the image of NTSC video images.
The ti
nt setting applies to NTSC video sources only.
White Intensity: increases th
e brightness of whites that are near 100%.
PC:
Force Wide: when this
is off, the analog locking algorithms choose the stan-
dard mode resolution (4:3) as the preferred default resolution. When this is
on, the analog locking algorithms choose wide mode resolution (16:10) as the
preferred default resolution.
Phase: adjust
s the horizontal
phase of a computer source.
Prevent PC Screen Saver: preve
nts your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Sync Threshold: (progressive
signals only) If a hardware devi
ce, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking:
adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: adjus
ts the position of a computer source.
Video:
Detect Film: determines whether the original source of the input video was
film (progressive) or video (interlaced).
Overscan: rem
ove
s noise around the video image.
Set Black Level: analyzes
the current input image and calculates an offset value
which is then added to the analog to digital converter black level value. This
ensures optimum black level for each analog source.