Filter
Top Products
6
7
8
Press the power button
1 Press menu, then press or to review menus.
2 Press select to enter a menu, then press or to review settings.
3 Press select to change a setting. If this shows more choices, press
or to update the setting, then press select or menu to save it.
4 Press menu to go back. Press it again to remove the menu.
Using the menus
Turn off the projector
Register your product
Optional: Read the Reference Guide
Activate your warranty to ensure eligibility for service and support.
Get special offers and notifications about free product updates.
The power light on the projector will blink while the fan cools
the lamp. If you need to unplug the projector, wait until the
fan stops and the power light stops blinking and stays on.
Note: While the power light is blinking, button presses on the
projector and remote are ignored.
Controlling your presentations
Connect the USB cable between the projector and your computer (see step ),
then press and to move through your presentation slides.
1 Write down your projector's serial number
It's printed on the label on the back of the projector. You'll need it to register (and if
you ever need to contact support).
Serial number:
The Reference Guide is available in multiple languages. It covers advanced setup and
operation, including lamp replacement instructions.
3
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Download it at www.infocus.com/support
2 Go to www.infocus.com/register