Filter
Top Products
32
Status and Service menu
Source Info: Displays current source settings (read-only).
Projector Info: Displays current projector settings (read-
only).
Reset Lamp Hours: Resets the lamp hours used counter in the Projector In
fo menu
to zero. Do this only after changing the lamp.
Factory Reset: Restores all settings (
except network settings, lamp hours,
language, ceiling mount, and rear projection) to their defaults.
Service Code: Only used by authorized service personnel.
Status and Service menu
Help
Press Help (on the keypad or remote) at any time to get interactive help for solving
common, picture, sound, and cabling problems.
NOTE: The projector can be re-programmed to display a custom (non-interactive)
screen when Help is pressed. To do this: Create your custom screen on a computer
and display it on the projector, then use the Take Snapshot command in the Setup
menu. When you see the Snapshot Successful message, hold down the Help button
until the message is removed.
To revert a customized Help screen back to the InFocus default Help screen, a Fac-
tory Reset will be needed.