Filter
Top Products
10
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable,
sold separately) to your computer and to the Audio 1 (used with VGA 1) or
Audio 2 (used with VGA 2) connector on the projector. You can also assign
your source to a different audio in connector, see page 24 and page 31
. You
may also need an adapter.
If you are using a desktop computer and want to see the image on your
compute
r screen as well as on the projection screen, connect the computer’s
monitor cable to the Monitor Out connector on the projector.
NOTE: Only
VGA video is sent to the Monitor out connector.
To display a presentation usi
ng a USB flash drive, see the Using LitePort
section on page 38. This feature converts presentations to JPEG images and
eliminates the need for a computer source. It can also be integrated with
commo
n wall plates and conference room input/output panels.
To advance slides in a PowerPoint presentation using the remote co
ntrol,
plug the USB cable between the projector’s DisplayLink connector and your
computer. Then press the up and down arrow buttons on the remote control
to move through your slides.
Connect monitor cable
Connect audio cable