Filter
Top Products
33
Remote control discrete codes
You can use these codes to program another remote to learn the projector’s
remote functions.
To activate discrete mode, press and hold the Custom button on the remote
for 10 seconds. The back light blinks twice when discrete mode is entered.
The remote buttons are now remapped to new functions as listed below. To
return to normal remote mode, press and hold the Custom button on the
remote for 10 seconds. The remote also returns to normal mode automati-
cally if no activity is detected for 2 minutes.
Table 5: Remote control discrete codes
Function Description
Remote
button
Power off turns power off Nav Up
Power on turns power on Nav Down
Native resize selects Native resize resize
16:9 resize selects 16:9 resize overscan
4:3 resize selects 4:3 resize source
Letterbox
resize
selects letterbox resize custom
Natural wide
resize
selects natural wide resize auto image
User preset 1 selects user preset 1 Source 1
User preset 2 selects user preset 2 Source 2
User preset 3 selects user preset 3 Source 3